FREE SHIPPING IN ITALY FROM €99

XPOWER - Presscontrol PLUTO | Pressure Controller for Pressure Tanks | Start at 1.5 or 2.2 Bar | Dry Run Protection | 230V

XPOWER  |  SKU: XP4698
€24,90 €29,00 IVA INCLUSA
Prezzo più basso ultimi 30gg: €24,90
Cut it
Non sai di quale elettropompa hai bisogno? Richiedi una consulenza gratis.

Description

XPOWER PLUTO — Presscontrol Pressure Regulator for Autoclaves | Start 1.5 or 2.2 Bar | 230V

Automate your pump without a pressure switch. The XPOWER Presscontrol PLUTO completely replaces the traditional pressure switch system with a pressure-flow operating principle: it starts the pump when the pressure drops below the set threshold (START) and automatically stops it when the flow ceases upon closing the tap (STOP). Available in two pre-set versions — PLUTO 1.5 Bar and PLUTO 2.2 Bar — it is compatible with single-phase pumps up to 1.5 HP. Made of polyamide 6 with 30% glass fiber, maintenance-free, with an integrated anti-water hammer compensation diaphragm.

Quick specifications:
  • Power supply: 230 Vac
  • Pump START: at low pressure (1.5 Bar or 2.2 Bar depending on the model)
  • Pump STOP: at zero flow (tap closed)
  • Maximum allowable pressure: 10 Bar
  • In/Out connections: G 1"
  • Pump compatibility: single-phase pumps up to 1.5 HP
  • Dry-run protection: yes
  • Anti-water hammer diaphragm: integrated

Choose the Version

Model SKU START Pressure Recommended use
PLUTO 1.5 XP4698 1.5 Bar Standard domestic systems, low head
PLUTO 2.2 XP4699 2.2 Bar Systems with higher head, irrigation, agricultural use

Main Features

  • Pressure-flow operation: START at low pressure, STOP at zero flow — no pressure switch required
  • Dry-run protection: stops the pump in the absence of water, preventing motor damage
  • Integrated compensation diaphragm: prevents continuous starts for small withdrawals and protects the system from water hammer
  • Polyamide 6 + 30% glass fiber structure: resistant, lightweight, durable, and maintenance-free
  • G 1" inline connections: direct installation on the pipe without adapters
  • Mandatory vertical installation: the absence of closing springs requires a vertical position
  • Replaceable electronic board: removed with 3 screws for quick maintenance or replacement
  • Indication LEDs: POWER yellow (line), ON green (operation), FAILURE red (malfunction)
  • Manual reset/start button: quick reset after a malfunction or forced start

Technical Data

SKU PLUTO 1.5 XP4698
SKU PLUTO 2.2 XP4699
Power supply 230 Vac
START Pressure PLUTO 1.5 1.5 Bar
START Pressure PLUTO 2.2 2.2 Bar
STOP Logic Zero flow (tap closed)
Maximum allowable pressure 10 Bar
In/Out connections G 1" (inline)
Pump compatibility Single-phase pumps up to 1.5 HP
Dry-run protection Yes
Restart attempts No
Compensation diaphragm Integrated (anti-water hammer)
Housing material Polyamide 6 + 30% glass fiber
Installation Mandatory vertical
Indication LEDs POWER yellow / ON green / FAILURE red
Reset Tactile button (reset + manual start)
Maintenance Maintenance-free (board replaceable with 3 screws)
Country of origin Italy
Installation note: The Presscontrol PLUTO must be installed in a mandatory vertical position (absence of closing springs). The G 1" inline connections allow direct installation on the pipe. Not suitable for three-phase pumps or those with a power rating higher than 1.5 HP. In the event of a malfunction, the red FAILURE LED lights up: press the reset button to restore operation.

Ideal Applications

  • Domestic water systems: automation of the pressurization pump for domestic water
  • Surface pumps: replacement of the traditional pressure switch with pressure-flow control
  • Submersible pumps: automatic start/stop control for wells and cisterns
  • Garden and agricultural irrigation: 2.2 Bar version for systems with higher head
  • Industrial and technological use: reliable automation in professional environments
Frequently Asked Questions (FAQ)

Q: Which version should I choose, 1.5 or 2.2 Bar?
A: Choose PLUTO 1.5 for standard domestic systems with low head. Choose PLUTO 2.2 for systems with higher head, irrigation, or agricultural use where a higher start pressure is required.

Q: Does it completely replace the pressure switch?
A: Yes, the Presscontrol PLUTO completely replaces the traditional pressure switch system. No diaphragm tank (autoclave) is required for operation.

Q: What happens in the event of dry running?
A: The Presscontrol PLUTO automatically stops the pump in the absence of water. The red FAILURE LED lights up. After restoring the water supply, press the reset button to restart.

Q: Is it compatible with three-phase pumps?
A: No, the PLUTO is exclusively compatible with single-phase pumps up to 1.5 HP of electrical power rating.


XPOWER - Presscontrol PLUTO | Autoclave Pressure Regulator | Start 1.5 or 2.2 Bar | Dry-Run Protection | 230V

XPOWER: reliable solutions for professional water management.

Security Information

Data about the Person Responsible for the Product:

Contact Person Responsible for the Product:

Product Safety Document:

Warranty

.

 

At BricoHome, we are committed to offering you high-quality products, aware that your peace of mind goes beyond a simple transaction. To ensure your complete satisfaction, we have implemented a robust warranty policy, demonstrating our commitment to quality and reliability.

In this section you will find information about our product warranty. We want you to be well-informed and confident in your choice, so we invite you to carefully read the warranty information. Our goal is to ensure you have a worry-free shopping experience, with the certainty that, if necessary, we are here to support you at all times.

Please contact us for any warranty request:


Please specify: first and last name, order ID, brand, product, and issue. We will look for the fastest solution for you and contact the brands as necessary.

Read the information document regarding the minimum two-year legal warranty provided in the European Union.


PRODUCT WARRANTY (STANDARD)
The warranty period is 12 months from the product purchase date for consumers who have an invoice. It is 24 months for those who have a receipt or other proof of purchase. 


PRODUCT WARRANTY WITH SEAL
For sealed products (e.g., insecticide), the warranty does not apply once opened. However, if the seal remains intact, you are entitled to a free return within 30 days.

Shipments

Shipping Details

Brico Home Ferramente ships exclusively via express courier. Orders are processed and shipped within 24 hours of placing an order on the website if placed on weekdays.

Shipments are made via the following couriers

When ordering, you can enter your shipping preferences in the notes section, choosing the desired courier.

Shipping Costs:

- Italy area (except Sardinia)

  • Standard shipping (€6.90), FREE for orders over €99
  • Priority shipping (€9.90), reduced cost to (€3.90) for orders over €99


- Italy area (Sardinia only)

  • Standard shipping (€10.90), FREE for orders over €99


- Eurozone 1 (Austria, Belgium, Croatia, Czechia, Denmark, France, Hungary, Luxembourg, Netherlands, Poland, Slovenia, Spain, Germany)

  • Standard shipping (€19.99)


- Eurozone 2 (Romania)

  • Standard shipping (€24.95)

Shipping times:

  • 24/48 WORKING HOURS FOR NORTHERN AND CENTRAL ITALY;
  • 48/72 HOURS FOR SARDINIA AND MINOR ISLANDS;
  • 24 WORKING HOURS FOR SOUTHERN ITALY INCLUDING SICILY;

Returns are always guaranteed and FREE, within 30 days of purchase.

 

Free returns

In any case, the consumer buyer has the right to withdraw from the contract without penalty and without specifying the reason within 30 days of receiving the purchased goods . If the withdrawal occurs within this period, we will arrange for the collection of the goods by courier at our expense , without the customer having to take any action. The customer must provide us with a date and time slot of at least 3-4 business hours , so we can schedule the collection at a convenient time.

- Refunds (if applicable)

Once we receive your return, we will carry out all necessary checks, verifying various aspects: such as the presence of the original box, the presence of any accessories or parts included, any damage not present in the original new product, etc. If your request is approved, the refund will be processed and a credit will automatically be applied to your card or original payment method. within 5 working days.

- Changes (if applicable)
We only replace items if they are defective or damaged.

In the event that the Consumer decides to exercise the right of withdrawal within the timeframes indicated above, you must notify the seller of this By email to info@jicomputer.com, or by completing the easy return form by clicking here.

If your return request exceeds 30 days, please provide as many details as possible so we can better assess the situation. Please note that in this case, the customer will be responsible for the return shipping costs.

Tax Deductions

A guide to purchasing with tax deductions and reduced VAT on Bricohome
If you're purchasing products for renovations, home improvements, or for specific needs, you may be eligible for significant tax breaks. Find out how to access these benefits and make your purchases even more affordable.


Who is entitled to it?
Tax breaks and reduced VAT are reserved for:
- Private citizens carrying out building renovation or energy efficiency improvement work;
- Condominiums for work on common areas;
- Companies and professionals who carry out specific interventions;

Which products are eligible for the discounts?
Not all products are eligible for tax relief. Generally , tax relief applies to materials and devices used for renovation, energy efficiency, and architectural barrier removal projects. To check the suitability of a specific product , we recommend that you consult the current legislation or contact our customer service.

On Bricohome, the most popular product categories eligible for the discounts include: Electric pumps, Pressure controls, Taps, Thermostats, Control units, Circulators, Intercoms and video intercoms.

Reduced VAT rates
Depending on the type of intervention, different VAT rates apply:
- 4% for the construction or purchase of a first home (if eligible).
- 10% for extraordinary maintenance, restoration, or renovation work.
- 22% for all products not subject to tax relief.


How to apply for the discount on Bricohome

To obtain the reduced VAT, it is necessary to:

  1. Place your order on Bricohome by selecting bank transfer as your payment method.

  2. Send a request to ......... with the subject line: "Tax deduction request for order ..." (the order number will arrive a few seconds after confirming the order on the website). Specify and provide the following information:

    - Name

    - Surname

    - Address

    - Telephone

    - Tax ID code

    - Type of deduction

    - Reference protocol number

    - Attach a copy of your identity document

    - Attach documents certifying your eligibility to meet the requirements.

  3. Please wait for your request to be processed. We will issue an invoice and send you bank transfer instructions within 48 business hours.

  4. Make the transfer following the instructions received.

  5. Once payment is received, we will proceed with the shipment of the goods.

Doubts or questions?
Write to us at info@jicomputer.com
Call us at +39 376 0343302

Do you need help?
Call us on 376 0343302

Secure payments

  • American Express
  • Apple Pay
  • Bancontact
  • Google Pay
  • iDEAL Wero
  • Klarna
  • Maestro
  • Mastercard
  • MB WAY
  • MobilePay
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa
  • HeyLight
  • Scalapay
XPOWER

XPOWER - Presscontrol PLUTO | Pressure Controller for Pressure Tanks | Start at 1.5 or 2.2 Bar | Dry Run Protection | 230V

€24,90 €29,00 IVA INCLUSA
XPOWER PLUTO — Presscontrol Pressure Regulator for Autoclaves | Start 1.5 or 2.2 Bar | 230V Automate your pump without a pressure switch. The XPOWER Presscontrol PLUTO completely replaces the traditional pressure switch system with a pressure-flow operating principle: it starts the pump when the pressure drops below the set threshold (START) and automatically stops it when the flow ceases upon closing the tap (STOP). Available in two pre-set versions — PLUTO 1.5 Bar and PLUTO 2.2 Bar — it is compatible with single-phase pumps up to 1.5 HP. Made of polyamide 6 with 30% glass fiber, maintenance-free, with an...
View product